Nu-safe making floors safer

  Sunday October 22 2017  

Tile & Concrete Cleaner™

Apply with a mop, cloth, sprayer, pressure washer, or steam cleaner.
Allow to stand for 5 to 10 minutes.
Let the cleaner do the work. Agitate as needed.
Remove dirty solution or rinse with cold or hot water.
To remove greasy soil from painted surfaces, mix with 8 to 10 oz per gallon of water.

Usage:

For general cleaning, mix at 4 to 6 oz per gallon of water depending on degree of soil.
For grease removal, mix at 6 to 8 oz per gallon of water depending on the build-up.





  View Nu-Safe product videos   Material Safety Data Sheet Tile Cleaner Information
 
 
Tile & Concrete Cleaner™ is not recommended for us on high gloss floor finishes..

Tile & Concrete Cleaner™ is not recommended to use full strength on bare wood, or painted surfaces.
(Product should be used less than 4 ounces per gallon of water on these surfaces. Test small area before using.)


Contact us today to learn your Floor Safety options.